Certified QA QC NDT

Quality Control and Quality Assurance Course

01-Jun-2024 Register Now


Alumni Career Transitions


Hiring Partners


Avg Salary Hike


Years of R & D in Syllabus

Certified QA QC NDT

Civil engineers play a major role in developing our nation.
We can see lot of highways, bridges and buildings designed and maintained in a good way and all of this is done with the help of Civil engineers. All of this can be achieved with the help of a civil engineer. All of these constructions are carried out properly. If there is any fault while designing the structure then it could cause a lot of problems, even many lives could be in danger due to this.

Civil engineering plays a major role in our life. After the completion of the construction, the job of the civil engineer is not over. A civil engineer must do periodic checking and maintenance of the structure and must determine how long this structure could last.Best Quality Control and Quality Assurance Course Training in India UAE Saudi Arabia Qatar Africa. 100% Placement Assistance.

Most construction companies are looking for skillful certified civil professionals. So one should be certified and skilled enough to grab an opportunity in this sector. SMEClabs can help you with this, if you choose SMEClabs to start your career in Civil then you can make sure that you could be a certified Civil professional. In most of the structures non destructive testing is required and it would be mostly carried out by a certified civil professional.

The quality of the construction must be maintained during the construction period and also after the construction period, and this would be done by the Civil QA QC. If you complete the QA QC jobs from SMEClabs then you can make secure your future.

  • Introduction to AutoCAD
  • Drafting Tools
  • Basic Drawing Tools
  • Modify Tools
  • Advanced Tools
  • Plan development
    • Basic Settings
    • Methods of drawing walls
    • Joinery block placements
    • Finishing Elements
    • Reinforced Concrete Elements
    • Rules for section line
    • Tags and dimensions
    • Fills
    • First Floor Edit
    • GF Elevation
    • Sunshade Section and Elevation
    • FF Elevation
    • GF Section
    • Staircase designing
    • FF section
    • Section Text placement
    • A3 print out using Layout
  • Introduction/Importance of Quantity Surveying
  • Role & Responsibilities of a Quantity Surveyor
  • Procedure of Estimation & Costing
  • Tender & Bid
  • Sanctions and types of Estimates
  • Standard Units and Technical Terms
  • Rules for measurements as per IS:1200
  • RCC beams & Reinforcement details
  • Reinforcement detailing of RCC Slabs
  • Reinforced concrete column
  • Quantity Calculations
  • BBS for RCC-Beam, Slab, Column with footing, retaining wall
  • Methods of taking out quantities.
  • BOQ of 2600 sq. ft residential building
  • Rate analysis of civil works-Elements & Requirements
  • Setting out of foundation trenches
  • Standard size of rooms in residential building and their locations
  • Lightening and ventilation of rooms
  • Types of pipe fittings in plumbing system
  • Vastu shastra for building construction
  • Anti-Termite Treatment
  • Painting Process
  • Autodesk – Quantity Take-Off (QTO)
  • Project-Residential Building with BOQ
  • FIDIC standards

Introduction to Quantity Survey

  • Who is a Quantity Surveyor?
  • Different types of Estimates
  • General terms used in the Detailed estimation

Introduction to Excel

  • Data Entry 
  • Cell Adjusting
  • Formatting
  • Coping and Filling
  • Worksheets
  • Formulas
  • View windows
  • Compare 2 sheets

Introduction to PDF Exchange Editor

Sample sheet preparation

  • Rain water recharge pit
  • Septic Tank and sock pit

Difference between Long wall – short wall method and center line method

Detailed Building Estimate

  • Earth work (Site clearance, Excavation & Filling)
  • Concrete work (PCC and RCC)
  • Brick work
  • Stone work (DRM and RRM)
  • Centering and Shuttering
  • Doors and windows
  • Internal Finishes
  • External Finishes
  • Sanitary and MEP works

Abstract of Estimated Cost

  • Introduction:
    • Quality
    • Quality Assurance
    • Quality Control
    • Quality Management System
  • Quality in construction/Objectives
  •  Codes and Standards
  • QA/QC Job Descriptions and Responsibilities
  • QA/QC Documents:
    • QAP/PQP (Quality Assurance Plan/Project Quality Plan)
    • QCP (Quality Control Plan)
    • Project Specifications
    • ITP (Inspection Test Plan) & Inspection Interventions
    • RFI (Request for Inspection)
    • ITR (Inspection and Test Report)
    • Document Control
    • Duties and Responsibilities
    • Quality Objective Analysis
  • Stages of Inspections.
  • General Work Procedure.
  • Red-Line and As-Built Drawings.
  • Major QC Inspection Categories.
  • Calibration and maintenance of measuring equipment.
  • Non-Conformance Procedure.
  • Quality Control in construction and basic elements.
  • Important Quality Control tests commonly conducted at construction site
    • Lab Test- CEMENT, CONCRETE (Fresh concrete, Hardened concrete), AGGREGATES, STEEL
  • Test on Bitumen
  • QC checklist for construction
  • Approval for construction
  • Process for construction
  • Project Management
  • Safety Management System
  • Concrete Mix Design-Principle and Procedure
  • Defects of Concrete
  • Levels of Certification
  • SEMI NDT/Partial Destructive Testing
    • Pull Off Test
    • Pull Out Test
    • Core Test

Liquid Penetrant Test (ASTM E 1417)

  • Introduction
  • Basic Principles
  • Steps of PT
  • Classifications
  • Types of Penetrants
  • Types of Cleaning
  • Developer Types
  • Post Cleaning Methods
  • Dwell time of Penetrants and Developers
  • Fluorescent Methods
  • Blacklight and White light devices
  • Indication Development, Interpretation and Evaluation
  • Safety

Rebound Hammer (IS :13311 (Part 2)-1992, ASTM C 805)

  • Introduction
  • Basic Principles
  • Apparatus
  • Types of Rebound Hammer
  • Calibration
  • Procedure
  • Application
  • Correlation between Compressive Strength of concrete and rebound number
  • Result
  • Range and Limitations /Factors affecting the result

Half Cell Potential Test (ASTM C876-91)

  • Introduction
  • Basic Principles
  • Apparatus
  • Procedure
  • Application
  • Result
  • Factors affecting the result
  • Advantages and Disadvantages

Ultrasonic Pulse Velocity Test (IS :13311 (Part 1)-1992)

  • Introduction
  • Basic Principles
  • Apparatus
  • Procedure
  • Methods of Testing
  • Method of calculation of Pulse Velocity
  • Result
  • Influence of Test conditions
  • Advantages and Disadvantages

Profometer/Rebar Locator/Concrete Cover meter (BS 1881:PART 204)

  • Introduction
  • Mechanism
  • Apparatus 
  • Calibration
  • Procedure
  • Factors affecting the result
  • Advantages and Disadvantages
  • Resistivity Meter
  • Windsor Probe Test
  • GPR
  • Maturity Meter test
  • Pile Integrity Test


** The above is the lite syllabus and doesn’t cover the full syllabus. To get full syllabus  Book a Free Demo Now

Interships - Certified QA QC NDT
Register Now

Certifications & Accreditations

NSDC 2 - Certified QA QC NDT
iisc 1 - Certified QA QC NDT
Zohobooks + Quickbooks
Diploma in Fire and Industrial Safety Management
ESSI - Certified QA QC NDT
CGSC - Certified QA QC NDT

Benefits of learning from us

Program Fees

Live Instructor Led Training Fee

  • The above fees are applicable to candidates in India only.

Mode of Training


Live Instructor Led

Virtual Lab


Comprehensive Curriculum

2 month +

Learning Content + Practicals

Regular Batch




10:30 AM IST

Fast Track Batch




10:30 AM IST

Extra 5% off on Courses

Coupon Code: UPGRADE

FAQ For Certification in Quality Control and Quality Assurance Engineering

  • QA QC Engineer
  • QA QC Supervisor
  • Equipment inspectors
  • Site Engineer
  • Project managers
  • QA Executive

The required minimum eligibility is +2, but this course is also suitable for the ones who have completed the diploma or graduated in any stream.

Yes, SMEClabs provides placement you can visit this website Placementshala to get more details regarding the placements.

  • You would be internationally certified after completing the Civil QA QC courses
  • You could get a lot of abroad opportunities
  • Handsome pay

The QA QC civil engineer should inspect the raw materials for the construction and must determine their quality. Should be able to carry out the nondestructive testing and must check the quality during the development process. After the development periodic inspection should be done too.

SMEC, one of India’s first worldwide EPC contractor company globally recognized for its distinctive services specifically in Marine & Industrial Automation, Instrumentation, Electrical, Pneumatics, Hydraulics and Mechanical sectors which started its journey in 2001. It has a R&D and training division SMEClabs which caters job-oriented training in various domains which helps an aspiring engineer /fresher or professionals to get a jump start to their career.

Download Now