Certified LabVIEW Developer

Labview Certification Course


Alumni Career Transitions


Hiring Partners


Avg Salary Hike


Years of R & D in Syllabus

Labview Certification Course

LabView software was developed by national instruments and this software is widely used in the instrumentation sector. LabView stands for laboratory virtual instrumentation workbench. In an industrial sector, several processes should be monitored and controlled and we can use LabVIEW to do this. We can monitor or control the pressure, temperature, flow, and level by using the Labview software.

This software can be used to do the virtual instrumentation, so it can perform the computerized tests and would display the measurement results. So it can be programmed to control the final control element in an industrial process.

LabView can take data from the sensors with the help of DAQ. LabView is capable to check the voltage, temperature, and vibrations, so you would be able to monitor the measurements with the help of DAQ. We can connect several industrial components such as PLC to the LabVIEW. LabView can also be connected to an industrial control system such as DCS. So it can graphically represent the industrial process this software would let you create automated results. Labview can also be used to do circuit simulation, this software is used by many engineers and scientists.

You can control, process, measure, and store most of the industrial processes. So due to all of these features Labview is used in most industries and thus opportunities in this field are increasing a lot.

If you are planning to learn LabView then SMEClabs would be a great option. You would be able to learn everything about LabView from SMEClabs. You would be able to learn a lot about LabView programming, Industrial Sensors, software, and a lot more.

  • Introduction
  • Environment
  • Dataflow
  • Data Types
  • User Interface
  • Programming Methodology
  • Boolean
  • String
  • Numeric
  • Comparison
  • Identify Common Problems
  • Debugging Tools
  • Automatic / Manual Error Handling
  • Loop Structures (While Loop, For Loop, Tunnels)
  • Timing
  • Shift Registers (Initialized, Uninitialized)
  • Plotting Data, Waveform Charts
  • Arrays
  • Clusters
  • Type Definitions
  • Custom Controls
  • Case Structure
  • Event Structure
  • Flat & Stacked Sequence
  • Diagram Enable/Disable Structure
  • Formula Node
  • Introduction to Modularity
  • Using SubVIs and the Connector Pane
  • VI Icons and Documentation
  • File Input / Output
  • Creating File and Folder Paths
  • Transfer files to Excel Sheet
  • Sequential Programming
  • State Programming
  • State Machines
  • Decorations
  • Change Screen Property
  • Create Application
  • Create Installer
  • Shape Detection
  • Colour Detection
  • Object Tracking etc.
  • Introduction to DAQ
  • Setting up DAQ
  • Communicating DAQ with LabVIEW
  • Digital output
  • Digital input
  • Analog Input
  • Analog Output
  • DAQ as Mustimeter
  • DAQ as DSO
  • Audio Processing
  • Project 1: Object colour sorting using Image Processing
  • Smoke sensors
  • Proximity
  • Ultrasonic
  • Accelerometer
  • Moisture
  • LED
  • 7 Segment Display
  • DC motor
  • Servo Motor
  • Stepper Motor
  • GSM Module
  • GPS Module
  • Bluetooth Module
  • Introduction
  • Classification of languages – Low level and High-level language
  • C Tokens – Keywords, Identifiers, Constants, Strings, Special Symbols, Operators
  • Data Types- Fundamental data types, Derived data types
  • Input and output functions in C
  • Looping statements- while, do…while, for
  • Decision making- if, if else, switch
  • Array, multi-dimensional array
  • String and String Functions
  • Functions, Classification of functions
  • Pointers
  • Break, go to, continue statements
  • Structure and union
  • Introduction to Arduino
  • Setting up IDE
  • Digital output
  • Digital input
  • Analog Input
  • PWM
  • Serial Communication
  • Installing libraries
  • Project 2: Air Data Acquisition and Analysis
  • Smoke sensors
  • Proximity
  • Ultrasonic
  • Accelerometer
  • LED
  • 7 Segment Display
  • DC motor
  • Servo Motor
  • Stepper Motor
  • Controlling and Monitoring Hardware over Internet
  • Project 3: IoT based Parking system
  • Project 4: Health Monitoring System

** The above is the lite syllabus and doesn’t cover the full syllabus. To get full syllabus  Book a Free Demo Now

Interships - Certified LabVIEW Developer
Register Now

Certifications & Accreditations

NSDC 2 - Certified LabVIEW Developer
iisc 1 - Certified LabVIEW Developer
Zohobooks + Quickbooks
Diploma in Fire and Industrial Safety Management
ESSI - Certified LabVIEW Developer
CGSC - Certified LabVIEW Developer

Benefits of learning from us

Program Fees

Live Instructor Led Training Fee

  • The above fees are applicable to candidates in India only.

Mode of Training


Live Instructor Led

Virtual Lab


Comprehensive Curriculum

120+ hours

Learning Content + Practicals

Regular Batch




10:30 AM IST

Fast Track Batch




10:30 AM IST

Extra 5% off on Courses

Coupon Code: UPGRADE

FAQ For Labview Certification Course

Yes, SMEClabs provides placement you can visit this website Placementshala to get more details regarding the placements.

  • Software development
  • Application engineer
  • LabView developer
  • LabView Engineer
  • System development Engineer
  • Control Engineer

LabView is used to do the control and also to do the measurements in laboratories it is also used in instrumentation and also in electronic & electrical sectors. So it is used in many industries and there are lot of vacancies because of this.

  • It can be used with other software
  • Data can be easily gathered from the field and it can be monitored
  • It can be connected with most of the hardware
  • It can be programmed according to our requirement
  • It can be easily interfaced with various communication links
  • You would be internationally certified
  • You would be trained by experienced professionals
  • You would be able to navigate the LabVIEW and also would be able to create the application
  • Debugging and troubleshooting the VIs
  • You would be able to create and access files with LabView

SMEC, one of India’s first worldwide EPC contractor company globally recognized for its distinctive services specifically in Marine & Industrial Automation, Instrumentation, Electrical, Pneumatics, Hydraulics and Mechanical sectors which started its journey in 2001. It has a R&D and training division SMEClabs which caters job-oriented training in various domains which helps an aspiring engineer /fresher or professionals to get a jump start to their career.

Labview Certification Course | #1 SMEClabs
Labview Certification Course - Certified LabVIEW Developer

Labview Certification Course from SMEClabs.The Complete LabVIEW Programming Beginner to Advanced.

Course Provider: Organization

Course Provider Name: SMEClabs

Course Provider URL: https://courses.smeclabs.com/labview-course/certified-labview-developer/

Course Mode: Blended

Course Workload: PT120H

Duration: 4

Repeat Count: 4

Repeat Frequency: Daily

Course Type: Paid

Course Currency: INR

Course Price: 60000

Editor's Rating:

Download Now

Download Now